Gudereit LC-R – SCNR

Heavy Weather brewing near Wissembourg

Heavy Weather brewing near Wissembourg

Since it was obvious that I need a more reliable bike, I’m looking for the right device. A friend once sent me a PDF of a very attractive gadget. I also considered other options, but the more I was looking for alternatives, the more I wanted exactly this one.

Surprisingly it was not that easy to find a dealer who has it on stock, at least at the right size. One offered to get one for his shop which I then could test. Fair enough. He anticipated that it would take four up to five weeks. I didn’t get any notification by him after those five weeks, and each time I called and asked he told me it will surely arrive during the next couple of days, at the beginning of the next or until the end of this week. As the bike finally arrived after eleven weeks we didn’t manage to agree in the contractual details. Meanwhile I had contacted other dealers, but to no avail. I decided to give up, considering the biking season was almost over and I still have another bike.

Last week, however, I decided to start a last attempt. I got a list of all dealers inside a radius of 30km from the manufacturer’s web page and sent them all an electronic message. I got some negative replies, but surprisingly the dealer next to me wrote he had one on stock and would be glad if I dropped by. They had time, they patiently answered my questions, they avoided to use the typical marketing speech, I got the occasion for a trial trip and finally they offered some modifications I desired at such a price tag I could not resist. They did the modifications instantly while I answered their questions concerning openstreetmap.

At 5PM I was on the road with my latest acquisition, carrying some tools to adjust the machine to my likings. Problem solved.

The following section is for all those perverts who like well done tech stuff, especially when it comes to bicycles. Get the tissues ready. All others, please leave us alone :) .

The bike is from Gudereit, a manufacturer from Bielefeld, Germany. The model is known as LC-R and available for a couple of years now. The technical details are adjusted each year. Compared to earlier models, the chain now is protected by a Hebie chain glider, and the chain tightener of former releases luckily has disappeared. The frame is a aluminium “smooth” welding frame. The bike has no suspension system and its weight is about 14,5kg (sorry for the bad picture, I still need to learn how to use the N900’s camera):

Gudereit LC-R

Gudereit LC-R

The light is a Busch & Müller Lumotec IQ Cyo senso plus LED, including a parking light and an auto switch. It’s really bright. I used an auto switch on my previous bike, and I don’t want to miss it.

I like an upright position on the bike, so I can see what the car drivers in front of me are doing. Thus I adjusted the stem almost to its maximum upright position:

Steep stem

Steep stem

The stem was too thick to mount the
Otterbox for my N900 mobile computer centered. I now mounted it to the handlebar excentrically, while the balls and crank allow to position it at the center of the handle bar:

Otterbox to protect an N900 smartphone

Otterbox to protect an N900 smartphone

The front hub hosts the dynamo, a Shimano DH-3N80. Additionally, the dealer replaced the quick clamps by a system called Pitlock. Also pay attention to the eyes of the spokes:

Front hub dynamo and Pitlock

Front hub dynamo and Pitlock

The pedals are different on either side. This way one can use the bike both with normal shoes as well as with specialized biking shoes:

LC-R Pedal

LC-R Pedal

LC-R Pedal

LC-R Pedal

I hope the bottom bracket lasts longer than the one of my previous bike. Unfortunately I have no information which one it is:

Bottom bracket

Bottom bracket

The chain is protected by a chain glider. I’m not a big fan of it yet. It’s rattling a lot, and I’d prefer a machine which quietly does its job:

Hebie Chainglider

Hebie Chainglider

The brake is a Magura HS-33 rim brake, based on a hydraulic system. This picture has been taken after a couple of kilometers, so some dust already has settled. Note the quick lock, which makes toolless dismantling of the brake possible:

Magura HS-33, model 2011

Magura HS-33, model 2011

Here’s the brake lever of the Magura. Frankly, I dislike the ad stickers applied to all parts of the bike:

Magura HS-33 Brake lever

Magura HS-33 Brake lever

The heart of the bike’s engine is a Rohloff Speedhub with 14 gears. That’s comparable to a 27 gears derailleur. It’s filled with oil which needs to be replaced once a year. I was surpriced by the noise it makes under certain circumstances, but anyway, it’s the most reliable bicycle gear money can buy, and there’s no alternative:

Rohloff Speedhub

Rohloff Speedhub

One of the details I like most is the special dropout. The position of the wheel is adjusted by two screws, both forced into a dado. Those screws are used to tighten the chain, but remain untouched in case you need to remove and reinsert the wheel. Changing the wheel thus does not require to retighten the chain:

Rohloff dorpout system

Rohloff dropout system

Operation

I’m not used to the bike yet, so it’s too early to judge the overall operation and reliability. I’ve seen some pitfalls already, though:

  • The Rohloff produces some severe noise under certain circumstances. As far as I have read, this is part of owning a Rohloff, similarly that Porsches have the ignition lock on the left hand side :) .
  • Yesterday I three times observed a surprising behaviour of the Rohloff Speedhub. Switching a gear resulted in the pedals running freely. Additionally, the gear positions pointer at the handle bar pointed between two gears. I hope this is an issue of some adjustment my dealer can improve. To work around this issue, ensure the handlebar switch is positioned exactly to one of the gears, not in between two of them.
  • The chain glider produces a lot of noise, depending on the gear used and the speed. Some additional rattling occurs in case that the surface is not planar.
  • The tyre I’ve chosen tends to move branches between the tyre and the apron. That’s nothing that is due to the manufaturer or dealer, as I’ve chosen those tyres. But be warned…
  • If you like an upright position, consider mounting the additionally available extension kit for the stem.

The years passing by will show whether this machine is worth its bucks. Of course I assume it is. Such a bike won’t move alone, so you still have to use you feet :) . And it has its shortcomings as any other technical device as well. The additional fee you pay is for its reliability and durability. And this bike hopefully provides both attributes.

4 thoughts on “Gudereit LC-R – SCNR

  1. Sven

    The Speedhub tends to get more quiet over the years.

    Mine is about 5 years old now and has been run for 20000-25000 Kilometers. Only gear 7 ist still producing its characteristic loud noise. All the others have gotten nearly silent.

  2. Kees

    I recently bought the same bike. Size 64. The bottom bracket most probably is Shimano BB-UN54 (Deore LX-level). You can tell by the white plastic that shows on your photo. It has a good reputation.

    The chainglider should not rattle. It does not with mine. It can be adjusted. Let the guy from the shop where you bought it do it.

    The Rohloff Speedhub produces hardly any noise in gear 8-14. Some noise in the other gears especially gear 7 is normal.

    During the first five kilometers I rode with the bike I experienced two times the same thing you did. During shifting the gear got lost and the pedals where running freely. Since then all went well until now (ODO 140 km).

    I kept the Marathon Racers. You switched to Marathon Plus Tour or ATB?

    Happy biking!

  3. ce Post author

    Thanks for the comment on the gear switching issue. The dealer did me a favour by fine-tuning the bowden cables of the Rohloff gear today.

    As I’m using forest tracks quite often, I chose the Schwalbe Marathon Plus Tour. The tyre now is close to the apron, but there are still 5-8 millimeters of clearance.

  4. Pingback: 3rd Black Forest uphill test of the Gudereit LCR « Points of Interest

Comments are closed.